Fire Tested Building Board

MANY BUILDING PRODUCTS HAVE BEEN ALLOWED INTO AUSTRALIA IN THE PAST FROM OVERSEAS COUNTRIES, OFTEN RELYING ON OBSCURE TESTING OR TESTS CARRIED OUT BY NON-REGULATED ELEMENTS OR TESTS THAT DO NOT RELATE DIRECTLY TO AUSTRALIAN REQUIREMENTS.

NOT JUST IN FIRE BUT IN MANY DIFFERENT TYPES OF PRODUCTS AND DISCIPLINES OF CONFORMITY.

FireCrunch Australasia Pty Ltd

FireCrunch Australasia Pty Ltd ABN 37 620 875 041 is an Australian company registered with ASIC the Australian Securities and Investments Commission under the Corporations law

The company owns the (ARBN) FireCrunch Australia under which the product is marketed.

The company is owned and operated by Australians and has no foreign ownership or shareholders.

FireCrunch is an imported magnesium oxide composite Fire Resistant building board made in China for FireCrunch Australasia.

It is suitable for load bearing to 55Kn or non-load bearing solutions in the construction of fire separation walls and a FCA shaft liner alternative.

K-Fire19, using light weight 1.15BMT Steel or 45mm X 90mm Radiate Pine timber to FRL 60/60/60 or to FRL 120/120/120 steel and with modifications in greater thickness over 10mm of MgSO₄ material to well over these FRL levels.

Made and tested to the FireCrunch specification in meeting the exacting levels of BCA, ABCB, and NCC Fire Resistant Building Compliance in Australia – AS 1530.4 and beyond.

All tested by NATA Accredited Labs, CSIRO and others in Australia.

The products contain no formaldehyde, asbestos or any toxic chemicals and is certified by NATA accredited testing laboratories “Clearsafe” NSW and Sharp and Howells, Victoria, as free from any metal corrosive chloride, or asbestos, which is an illegal substance in Australia see web site certification.

FireCrunch has been used extensively in the building and construction industry in Australia for over 10 years, and now with the new, most economic $ -40% shaft liner fire separation party wall, with thinner walls, providing more internal space check… K-Fire19.

Used in all properties with common walls, townhouses, semi-detached dwellings, cluster housing duplexes and hi-rise residential and commercial buildings, party walls and fire separation.

All FireCrunch cladding in 10mm per side also meets the max BAL FZ, Max Flame Zone in fire resistant building in bushfire building areas with just 45mm x 95mm walls in timber or steel framing – AS3959, AS1530.4, AS1530.8.2, AS3837 and AS1530.1.

FireCrunch is Australia’s most extensively fire-tested cladding with the highest carbon capture 95%, a very low CO₂ pollutive construction product, sold at market economic rates.