K-DECK TG 16mm GROOVED BOARD DECKING

PASSIVE FIRE DECKING

Lower prices and affordable fireproof decking BAL FZ

Exterior, inexpensive, great looking, long life timber appearance 16mm BAL FZ, fireproof, non-combustible and fire resistant decking sheets: 2700 x 600 x 16mm.

K-Deck is totally non combustible up to 90 minutes at 1000 deg C. being a totally fireproof decking product. This is three times the maximum bushfire BAL FZ decking requirement. All other composite decking only makes it to BAL 29 or BAL 40 decking material. Finding a fireproof decking product BAL FZ timber appearance at a reasonable price is not easy, FireCrunch decking provides that option.

 

K WALL TS 12MM AND K DECK TG 16MM DK FCA

K-Deck TG 16mm Grooved Board

 

STANDARD BOARD SIZES

Board nameSize (width/length)ThicknessEdgeWeightPattern
K-Deck600x270016mmTongue & Groove32kgGroove

For those living in bushfire areas requiring BAL FZ flame zone decking or bushfire decking, it is almost impossible to find. Now the regulations in some CFC cement products have been changed.

Exposed timber in bushfire areas is not allowed and bushfire compliant decking made of composite fireproof timber appearance materials is almost non-existent.

Compliant bushfire decking is however provided by FireCrunch K-Deck with the composite MgSO4 timber appearance MgO decking boards.

FireCrunch Australasia NATA Labs fire tested BCA compliant building products.

Call 1300 933 102 or click here for online enquiry.

K-Floor installation of TG19 finished prior to coatings

K-Floor/K-Deck installation of TG19 finished prior to coatings

K-Floor installation of TG19 Cross Member Lay

K-Floor/K-Deck installation of TG19 Cross Member Lay

K-Floor installation of TG19 Gun Fire Sealant

K-Floor/K-Deck installation of TG19 Gun Fire Sealant

QUICK REFERENCE TOPICS

  • (ATL) Accredited Testing Laboratory -NATA.

  • Fire resistant to extremely high temperatures (1200ºC).

  • Meets AS 3959 BAL FZ and more, up to FRL 90/90/90.

  • Non-combustible (AS 1530.1) valid 2029 (ATL) NATA CSIRO.

  • NCC 2022 C1 TO C19 AS1530.4 2014 – NCC 2022.

  • NCC C2.2, C2.6, CLD9, C2D11 and others under NCC 2022 Fire Hazards.

  • Smoke and heat release AS3837 NATA CSIRO (ATL).

  • 30, 60, 90 and 120 minute fire resistance in load and non-load bearing tests.

  • Timber and steel fire tested (AS1530.4-2014) valid 2029 NATA CSIRO (ATL).

  • AS5367 Resistance to Incipient Spread of Fire/Flashover.

  • Non-asbestos, AS4964 (ACL) NATA Labs Australian Certification.

  • Resistant to flooding and prolonged water emersion.

  • Resistant to bacteria moisture, humidity, mould and mildew.

  • Completely resistant to termites and insects.

  • Low thermal conductivity ~0.44 (W/mk).

  • Higher R-values than plasterboard.

  • Less expensive, eliminates multiple layers of plasterboard for high FRL.

  • (RISF) Resistance to Incipient Spread of Fire and Flashover (AS5637 CSIRO) ATL.

  • Lowest CO2 pollutive 5% vs. plasterboard 95%.

AUSTRALIAN STANDARDS (CERTIFICATED IN AUSTRALIA NATA LABS CSIRO)

See Certifications

Fire
FRL 90/90/90 1 x 10mm sheet EACH SIDE STEEL FRAMES FRL 60/60/60 1 x 10mm sheet PER SIDE TIMBER FRAMES

Impact
10 times stronger than plasterboard.
LOAD BEARING 55kN (1.5 hrs) at 1000⁰C (see CSIRO fire test report).

Acoustics
Rw 62 AS 717.1 (See Certifications)

Asbestos
Nil content test AS 4964 Nil Chloride
R and U value (See Certifications).

Handling
Cuts, saws, drills, routs, with timber tools, power gun screwing, massive time saving on installation.

Labour Cost Benefits
FireCrunch requires 1 sheet each side for FRL up to FRL 90/90/90 (FyrChek needs 3 layers 13mm each side) or 2 layers 16mm.

Strength
10 x Stronger than plasterboard density 1.15g/cm3.

Eco-Friendly
95% less CO2 emission than plasterboard