New 21st multiple application Building Product takes Construction Industry by storm – FireCrunch and K-clad
FIRE – BUSHFIRE – FLOODS – IMPACT – TERMITES – ANTI BACTERIAL – ECO TREE & PLANET FRIENDLY
Avoid compromising your budget large or small and time in searching for fire resistant building board, cladding options. Professional industry now specifies FireCrunch for most building and fire rated cladding material needs.
FireCrunch NATA/CSIRO fire tested, fire resistant building board AS 1530.4- FRL 60/60/60, FRL 90/90/90 and FRL 120/120/120. Deemed to Satisfy.
Additional NCC alternative performance solutions for FireCrunch K-Clad product range is specifically designed to withstand the harsh and unpredictable Australian climate without fail to ensure maximum longevity.
We are committed to the manufacture of our building board range in an environmentally friendly fashion and have successfully established a powerful and responsible image in the Australian building market for fire tested building materials.
FireCrunch boards and products are 10 times stronger than plaster board and emit a final very low Co2 value of only 5%.
As a proudly Australian owned and operated company, FireCrunch continually strives to deliver the finest customer service to our Australia-wide clients. For this reason, we have made the delivery of our fire resistant building board range available in Australia using the new NATA LABS tested 2nd generation (MgSO4) Magnesium sulphate boards eliminating any metal /steel corrosion with NATA non chloride content. See certifications
Plasterboard and CFC compressed fibre CFC, Blue board, Villa board and the like have been the bane of the construction industry for 40 years. Regardless of so called weather sealed Fyrchek and similar fire rated plaster board, it does not perform at all well in exterior applications, with nothing better available until K-Clad arrived: fire resistant 10mm, interior exterior building cladding.
With our professional and experienced team at FireCrunch, we provide you with the necessary accurate advice and installation manual guidance to ensure you get the most out of our fireproof building board specification every time. Fire Safety is the predominant aim of the FireCrunch FCA product range, wall ceilings, floors, decks, fire wall penetrations, fire collars, and covers most fire rated construction configuration.
FireCrunch, fire resistant building materials, has most of the answers.
Whether its fire or deep water flash flooding, termites, or pests that feed on expensive timber framing, our fire resistant building K Clad and K products range will not deteriorate and withstands mould , mildew , high impact resistance ,bacteria, mould and mildew.
With the added benefit of FireCrunch K-Clad, fire rated building board range being 100% free of harmful chemicals and toxins, or VOC it can be used with total confidence. CSIRO AS/ 1530.4-2005/16 See MSDS Technical Specs.
|K-Clad: Interior/exterior cladding (10mm)|
|K-Wall: Interior/exterior tongue & groove (12mm)|
|K-Deck: Exterior tongue & groove (16mm)|
|K-Floor: Interior tongue & groove (19mm)|
|K-Roof: Exterior tongue & groove (19mm)|
|General technical installation reference|
|Boundary walls: Timber Framing|
|Boundary walls: Steel Framing|
At a glance
|Fire resistant to extremely high temperatures (1200ºC)|
|Meets BAL FZ, FRL 60/60/60, FRL 90/90/90 and up to FRL 120/120/120|
|Non-combustible AS 1530.1 AS1530.4 NCC assessed AS1530.8.2 and AS 3959 smoke release AS3837|
|Non-asbestos, Australian NATA tested certification AS 4964|
|Resistant to flooding and prolonged water immersion|
|Resistant to bacteria moisture, humidity, mould and mildew|
|Completely resistant to termites and insects. Protects timber framing|
|Low thermal conductivity ~0.44 (W/mk)|
|Higher R values than plasterboard 50%|
|Less expensive, eliminates multiple layers of plasterboard for high FRL fire separation walls|