Firecrunch Queensland Suppliers

IMPORTANT NOTICE: FireCrunch MgO Board FCA is a “Non-Metal Corrosive”, MgO “Sulphate” Board (MgSO4), Australian NATA Labs Certified, Click Here for Non Chloride Non Corrosive Content Certificate.

Suppliers are available in Queensland, Brisbane and Gold Coast and will be available and advertised on this website as they become available. If there is no supplier in your area click here

Trade Discounts Available to Licenced/Registered Trade for Bulk Orders.

For information on bulk order discounts and/or becoming a supplier – click here

Quick Reference Topics

Fire resistant to extremely high temperatures (1200ºC).
Meets BAL FZ and up to FRL 90/90/90.
Non-combustible (AS 3837).
Non-asbestos, Australian certification.
Resistant to flooding and prolonged water emersion.
Resistant to bacteria moisture, humidity, mould and mildew.
Completely resistant to termites and insects.
Low thermal conductivity ~0.44 (W/mk).
Higher R values than plasterboard.
Less expensive, eliminates multiple layers of plasterboard for high FRL.

Australian Standards (Certificated in Australia)

See certifications:

Fire
1.5 hours 1 x 10mm sheet.

Impact
10 times stronger than plasterboard, load bearing 55kN (1.5 hrs) at 1200⁰C (see CSIRO fire test report).

Acoustics
Rw 62 AS/717.1 (see report certification).

Asbestos
Nil content test AS 4964 R and U value (see Tech info charts).

Handling
Cuts, saws, drills, routs, with timber tools, power gun screwing, massive time saving on installation

Labour cost benefits
FireCrunch Requires 1 sheet each side for FRL up to FRL 90/90/90 (p/ board needs 3 layers 13mm each side).

Strength
10 x Stronger than Plaster Board.

Eco-Friendly
95% less Co2 Emission than Plaster Board

Firecrunch Queensland Suppliers

Quick Reference Topics

Australian Standards (Certificated in Australia)

FireCrunch has been fire tested by Australia’s highest testing authority, the CSIRO.

FireCrunch has been fire tested by Australia’s
highest testing authority, the CSIRO.