Firecrunch New South Wales Suppliers

Suppliers are available in New South Wales, Sydney and Blue Mountains and will be available and advertised on this website as they become available. If there is no supplier in your area click here

Trade Discounts Available to Licenced/Registered Trade for Bulk Orders.

For information on bulk order discounts and/or becoming a supplier – click here

Quick Reference Topics

Fire resistant to extremely high temperatures (1200ºC).
Meets BAL FZ and up to FRL 90/90/90.
Non-combustible (AS 1530.1) and smoke release AS/3837.
Fire Tested (AS 1530.4/2016)
30,60 90 Minute fire resistance
Non-asbestos, NATA Australian certification.
Resistant to flooding and prolonged water emersion.
Resistant to bacteria moisture, humidity, mould and mildew.
Completely resistant to termites and insects.
Low thermal conductivity ~0.44 (W/mk).
Higher R values than plasterboard.
Less expensive, eliminates multiple layers of plasterboard for high FRL.

Australian Standards (Certificated in Australia)

See certifications:

Fire
1.5 hours 1 x 10mm sheet.

Impact
10 times stronger than plasterboard, load bearing 55kN (1.5 hrs) at 1200⁰C (see CSIRO fire test report).

Acoustics
Rw 62 AS/717.1 (see report certification).

Asbestos
Nil content test AS 4964 R and U value (see Tech info charts).

Handling
Cuts, saws, drills, routs, with timber tools, power gun screwing, massive time saving on installation

Labour cost benefits
FireCrunch Requires 1 sheet each side for FRL up to FRL 90/90/90 (p/ board needs 3 layers 13mm each side).

Strength
10 x Stronger than Plaster Board.

Eco-Friendly
95% less Co2 Emission than Plaster Board

Firecrunch New South Wales Suppliers

Quick Reference Topics

Australian Standards (Certificated in Australia)

FireCrunch has been fire tested by Australia’s highest testing authority, the CSIRO.

FireCrunch has been fire tested by Australia’s
highest testing authority, the CSIRO.