Tools Requirements

No special tools are required to use FireCrunch. It can be sawn, drilled, screwed and planed just like timber. Once in position, our fire rated building boards have an exceptionally long-life span, exceeding that of all homes using conventional plasterboards, paper lined plasterboards or timber lining methods. In addition, no replacement is required after flooding; simply unscrew the building boards from the framing, dry it out, light sand and re-paint. FireCrunch is made for your convenience, adhering to the highest Australian (BCA) standards.

Quick Reference Topics

Fire resistant to extremely high temperatures (1200ºC).
Meets BAL FZ and up to FRL 90/90/90.
Non-combustible (AS 3837).
Non-asbestos, Australian certification.
Resistant to flooding and prolonged water emersion.
Resistant to bacteria moisture, humidity, mould and mildew.
Completely resistant to termites and insects.
Low thermal conductivity ~0.44 (W/mk).
Higher R values than plasterboard.
Less expensive, eliminates multiple layers of plasterboard for high FRL.

Australian Standards (Certificated in Australia)

See certifications:

Fire
1.5 hours 1 x 10mm sheet.

Impact
10 times stronger than plasterboard, load bearing 55kN (1.5 hrs) at 1200⁰C (see CSIRO fire test report).

Acoustics
Rw 62 AS/717.1 (see report certification).

Asbestos
Nil content test AS 4964 R and U value (see Tech info charts).

Handling
Cuts, saws, drills, routs, with timber tools, power gun screwing, massive time saving on installation

Labour cost benefits
FireCrunch Requires 1 sheet each side for FRL up to FRL 90/90/90 (p/ board needs 3 layers 13mm each side).

Strength
10 x Stronger than Plaster Board.

Eco-Friendly
95% less Co2 Emission than Plaster Board

Quick Reference Topics

Australian Standards (Certificated in Australia)

FireCrunch has been fire tested by Australia’s highest testing authority, the CSIRO.

FireCrunch has been fire tested by Australia’s
highest testing authority, the CSIRO.